tvONE is a world class developer and manufacturer of video conversion and AV signal distribution technology. The tvONE brand specialises in video, audio and multimedia processing equipment, based on its proprietary CORIO® video conversion technology. Products include all-in-one system solutions, windowing processors, scan converters, seamless switchers, video scalers, up/down/cross converters, analogue-digital converters (SD/HD-SDI, HDMI, DVI), format converters and standard converters.
Magenta Pathfinder KVM over IP
Magenta Pathfinder 500 Series provides a scalable, zero latency, KVM (Keyboard, Video, Mouse & USB 2.0) extension and switching solution. Capable of up to 3,000+ high-quality endpoints in a single system, it’s the perfect solution for mission critical control and collaboration including Medical, Broadcast and Control room operations.
Magenta Pathfinder offers plug-and-play setup with no configuration of endpoints required, nor any costly user licensing fees. Pathfinder can extend and mix 4K and HD sources via CAT or Fibre cable to create a flexible wide-reaching KVM matrixing solution.
Advanced features include the ability to monitor and control up to 4 PC’s from a single 4K monitor; while using only a single keyboard and mouse to control the PC of your choice. Alternatively, take your extended PC desktop to dual displays via a Pathfinder TX/RX pair.
Rack it, Power it, Cool it. With ONErack by tvONE.
ONErack is a universal, powered mounting system to improve rack installation of small devices by reducing the rack space required, eliminate their DC power supplies, securing and cooling them. Watch the video below to learn more.
tvONE’s design converts randomly sized, externally powered devices from any manufacturer into slide-in modules that can be installed quickly and cleanly and serviced easily. Chassis are available in 4RU, 5RU and 6RU and can hold up to 16 modules with up to 2 voltage selectors each. When using the ONErack Power Supply, each voltage selector, can provide power @ 5v, 7.5v, 9v, 12v, 13.5v, 18v, & 24v up to 35 watts. A pass thru is also available for custom power sources. Each ONErack Chassis can include 1 or more Power Supplies for added power which can also feed additional chassis, providing a clean power solution for all mounted devices. For service, just slide out a failed device, no cable ties, no guessing. Close the front of your ONErack with a Fan cover and keep it all cool. Up to 32 devices in just 4RU, powered and cooled!
tvONE Begins Shipping CORIOview
Make the most of your visual space
CORIOview is the fastest, most intuitive 4K multi-window processor with up to 8 sources. This easy to use, plug and play solution features front panel control for preset recall or source selection. With six (6) product variants CORIOview can take in almost any input type and display it on a HDMI display up to 4K. Input types include: IP, HDMI, DVI-U and SDI.
Preset Layouts – CORIOview has 16 different preset layouts
Transitions – Fade through black or eye-catching motion transitions, provide a unique visual experience
Labels & Borders – Sources can be labelled making them easily identified
Front panel control – CORIOview’s front panel is minimalist in its design and is easy to use.
Format conversion – CORIOview offers Up/Down/Cross conversion for the full range of analogue and digital video signals.
Control Options – CORIOgrapher is tvONE’s intuitive control software for configuration and operation of your CORIOview.
Audio Embedding / De-embedding – Any input able to be routed to any output.
Ultra-Quiet Operation – CORIOview is perfect for your in-room install with its whisper quiet operation.
Mounting Options – A 1RU mounting kit is available for both single and dual units as well as a surface mount option
New Features to CORIOview
Secure Command Interface
Secure Communication mode – provides a mode to encrypt all networked based communication through AES128 encryption to provide private communication in mission critical applications where network security and authentication is essential.
REST API / WebSocket
Based on industry standard schema, CORIOview supports REST API providing multi-user communication to the device. Integrators can now subscribe to a growing range of events to provide real time feedback from CORIOview (such as: HDMI handshake, lost source, USB stick removed). These events can be used by a control system to automatically monitor the performance and events of the videowall and respond accordingly.
Multiple control points – Using our REST API up to four users can now control a single CORIOview simultaneously making programming, control and fault finding a dream. In addition to control via CORIOgrapher, simultaneous control is possible using a third-party control system using our real-time API interface.
Emergency cut/mute features
Cut individual canvasses to black and mute audio or cut all outputs to black and mute.
CORIOview will now automatically “clone” the main output to a second connector when a module is fitted with more than one output. This could reduce the quantity of equipment required in the set-up enabling the output from CORIOview to be sent to two different displays without the need for a distribution amplifier.
Provide an interface in CORIOgrapher to allow users to quickly and easily upload their own custom EDIDs to CORIOview. The feature allows a number of custom EDID’s to be loaded and assigned to inputs.
CORIOview’s output can be rotated to use with landscape or portrait displays. Rotation can be set to 0°, 90°, 180° or 270° depending upon the display orientation. Rotation is achieved by a setting within CORIOgrapher.
Now shipping! New 8×8 and 4×4 HDMI 2.0 matrix switchers
The MX-65xx Matrix Switcher Series is designed to allow the distribution of HDMI 2.0a (with HDCP) sources to multiple display devices independently or all at the same time using an intuitive front panel, infrared remote control or our control software, MX-tools.
- HDMI 2.0a compliant
- 4K2K@60 4:4:4 processing with 8bit and 10bit colour depth
- HDR for deep colour resolution
- HDCP 2.2 compliant
- Save up to 16 presets
- Control via front panel buttons, RS-232, TCP/IP, lnfraRed and MX-tools
- Supports 7.1 channel digital audio, DTS, Master and Dolby TrueHD
- Auto-detect EDID learning and management
- Robust 1RU rack-mountable metal case
NEW! Free CORIO®master App for Smartphones & Tablets
The CORIOmaster App is a free application for smartphones and tablets that extends the control of CORIOmaster video walls onto mobile platforms. With the new App, users now have access to the powerful video wall processing systems in the palm of their hands. Search “CORIOmaster” in the Apple Store & Google PLAY.
- Execute all simple control functions with ease
- View all canvases
- View ‘source to window’ assignments
- Activate presets
- Switch inputs
- Assign fresh sources to windows
- Send single or command chains using API commands set
HD-One Ultra-Thin PoH Receiver (MG-CT-612)
The Magenta MG-CT-612 Receiver provides HDMI 4K extension and power over HDBT up to 130ft (40m) and HD extension up to 230ft (70m). The Receiver’s ultra-thin form factor, just 16mm thick, allows the unit to be mounted easily behind any monitor. The HD-One Receiver provides PoH (Power over HDBaseT) and is fully compatible with HD-One MG-WP-611 series wall plates, CORIO video wall and Magenta HD-One TX products detailed below.
Small, yet mighty dual-window scaler – The 1T-C2-750 Scaler PLUS
The best-selling, most versatile, dual DVI/HDMI Scaler PLUS has two high quality graphic scalers used to convert digital DVI/HDMI or analogue DVI-A signals to other formats with full CORIO2 picture-in-picture flexibility.
The 1T-C2-750 Dual-PIP DVI/HDMI Scaler PLUS is based on tvONE’s exclusive CORIO®2 technology and has two high quality graphic scalers capable of working at full DVI video rates with extremely low system latency. The two scalers can be used to convert digital DVI-D/HDMI or analog DVI-A signals to another format, with full CORIO®2 picture-in-picture flexibility.
DVI-D resolutions up to 1920×1200@60Hz and 1080p are supported along with analog DVI-A (or HD15 via optional adaptor) resolutions up to 2048×2048 at virtually any refresh rate. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats.
The 1T-C2-750 can also be used as a Seamless Switcher device, enabling the user to toggle between the two inputs with instantaneous cuts. HDMI audio can be embedded, switched or set to what is being viewed in a specific video window. Two Still Image Stores are built into the unit which can store ten graphic images each to be used in place of one or both of the DVI-I/HDMI inputs to add custom logos or backgrounds.
The perfect solution for many applications:
- DUAL INPUTS FOR HDMI, DVI-I OR VGA
- TWO HIGH-QUALITY CORIO® SCALING ENGINES
- SINGLE OR DUAL PICTURE-IN-PICTURE
- BACKGROUND COLOUR AND BORDERS
- ULTRA-LOW LATENCY PERFORMANCE
- DISSOLVE, SEAMLESS CUT, WIPE OR FADE THROUGH BLACK
- ZOOM & SHRINK WITH PIXEL PERFECT ACCURACY
- KEYING WITH TRANSPARENCY CONTROL
- FRONT PANEL OR 3RD PARTY CONTROL
- 10 USER DEFINABLE PRESETS
- UP/DOWN/CROSS CONVERSION FOR ALL INPUTS
- TWO STILL IMAGE STORES FOR GRAPHICS OR LOGOS
- OUTPUT TO DISPLAY, PROJECTOR OR LED WALL
See it in Action!
NOW SHIPPING! The 1T-DA-68x Distribution Amplifier Series
The 1T-DA-68x series provides a high-performance solution for distributing HDMI signals with video output up to 4K2K@60Hz (YUV444) resolutions and HDR (High Dynamic Range Imaging) support, which gives the most life like video experience. The series includes 1T-DA-682 (1×2 HDMI 2.0 DA), 1T-DA-684 (1×4 HDMI 2.0 DA), and 1T-DA-688 (1×8 HDMI 2.0 DA).
Support is also offered for up to 32 audio channels with sampling rates up to 192kHz and pass-through of 7.1 channels of digital audio including high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and Dolby ATMOS. A screw on power adaptor cable prevents inadvertent disconnection of power and Integrated flanges allow for easy mounting to a wall or under a table.
HDMI 2.0a compliant
HDCP 2.2 compliant
Supports 7.1 digital audio, Dolby TrueHD, Digital Plus, Atmos and DTS
Flat wall mounting
NOW SHIPPING! The HD-One Wall Plate Transmitter Series
The HD-One wall plate transmitter series enables switching for HDMI (up to 4K) and VGA (up to 1080p) signals, while providing HD extension up to 70 meters (230ft) and 4K extension up to 40m (130ft) over HDBase-T. Supporting local power and Power over HDBaseT (POH), HD-One is simple to deploy and works with any Magenta HD-One RX or tvONE CORIO.
HDMI, VGA and Audio inputs with RS-232 control
Inputs can be switched automatically, manually or by RS-232 control
High quality matte anodised aluminium finish (US version featuring a decora plate)
Delivers full uncompressed HD video 3D and 4Kx2K, RS-232 and IR
Supports VESA resolutions up to 1920×1200@60Hz and HD TV resolutions up to 1080p
HD extension up to 70 meters (230ft) and 4K extension up to 40m (130ft)
Automatically match signals to display native resolution with built-in scaling
PoH (power over HDBaseT) allows powering from the receiver (MG-CT-612)
tvONE C2-2855 Universal Scaler Plus
Our C2-2855 provides high quality bi-directional conversion between a variety of analogue and digital video formats. Versatile features include Picture-in-picture, keying, logo insertion and Auto-Switching.
C2-2855 Universal Scaler Plus is first in a new generation of high performance scalers that provides best-in-class video scaling and format conversion along with revolutionary, intuitive user interface tools. This new design has more input/output flexibility than any other previous tvONE scaler, and it can be set up in less than 1/3 the time of the previous generation. The unit can be managed from the front panel with its new, crystal clear OLED display and color-modulated, backlit buttons or by IP via computer-based control panel. An RS232 serial interface is also provided for use with 3rd party control systems.
Living up to its designation as a “Universal Scaler” the C2-2855 supports SD/HD/3G-SDI, HDMI, DVI, Composite Video, YC, YUV, YPbPr or RGB, on both inputs and outputs. In addition to extremely high quality scaling and conversion, the C2-2855 also provides powerful Picture-in-picture, keying and logo insertion featuress . It stores up to 5 still images and 5 logos for layering in the output video. Twelve user-defined presets are readily available for instant, on-the-fly adjustment for diverse customized applications.
Audio – Advanced audio architecture provides integrated 4×1 audio switching. The four impedance-independent unbalanced inputs follow the video selection. A rear panel terminal block and a 3.5mm jack-socket provides versatile access. Embedded Audio Support allows any audio input to be embedded on the HDMI, DVI, and SDI outputs. The C2-2855 can also de-embed audio input from HDMI or SDI signals for routing to analog audio outputs.
NEW! The Auto-Switching function turns the C2-2855 into a powerful standalone device. Allowing the user to connect their source and have it automatically displayed on screen without having to press any buttons. The incoming resolution is quickly detected and analysed meaning within a few seconds the user is up and running and ready to present. This is particularly useful in situations where there is little or no technical supervision such as in meeting rooms, medical environments, teaching spaces or live staging events.
Do you need to combine the outputs of several projectors to increase the image size or overall resolution with seamless edge blending? tvONE offers a range of solutions to allow for every requirement and budget. tvONE offers a wide range of solutions and price points for projector blending. Our solutions can blend across every edge of the frame vertically and horizontally plus the blend can be set up quickly and easily using our CORIOgrapher or CORIOtools suite software. Do you need to blend a lot of projectors for a major display or do you want ultimate control? This is when tvONE’s high end solutions – CORIOmaster and CORIOmaster mini come into their own. The flexibility of the hardware is integrated with leading software control using CORIOgrapher.
Video walls can be used to combine several displays together to make larger displays or to be arranged in a structure or layout for a more creative approach. After something simple? 2 x 2, 3 x 3, 4 x 4 – whatever your video wall requirement we can help you to create it quickly and simply! In addition to landscape and portrait screen orientation we can also correct for your display size, bezels and resolution. Do you have your screens displayed on different orientations or do you have a mix of display areas, resolutions or bezels. Perhaps you are also using a mix of a video wall and projectors? CORIOmaster and CORIOmaster mini controlled by CORIOgrapher software are tvONE’s multiple award winning solution!
Whether it is for an industrial or broadcast application, or you want a creative solution for your presentation, tvONE has a multiviewer that will deliver pristine video scaling and unique display features. If you need to add multiple video walls together to create large video walls in a monitoring center, then the C2-6000 series can be easily cascaded for the ultimate flexibility between DVI and HD-SDI sources all control simply using CORIOtools Suite. tvONE’s C2-6000 series Multiviewers offer the ultimate flexibility for multiviewer applications with 5 inputs, Still Image Store, 4 Scalers, keying and UMD’s (under Monitor Displays).
Scaling, switching and combining various types of inputs with various resolutions without limitation is at the heart of what tvONE does. Whatever the source (DVI-U, HDMI, SDI, VGA, Composite or S-Video) or format, tvONE CORIO 2 scalers feature an extensive resolution table plus users can also create custom resolutions. There is also full control of frame rate, frame/field handling and 3D frame packing. tvONE offer a broad portfolio of solutions delivering powerful and creative features including:
- UP/DOWN/CROSS CONVERSION
- MULTIPLE INPUTS
- MULTIPLE PICTURE-IN-PICTURE
- LOGO INSERTION
- STILL IMAGE STORE.
ONErack Powered Mounting System
The ONErack is now ready for mission critical applications! This universal, powered mounting system already improves rack installation of small devices but now you can add redundancy to equipment, never before possible. But not just redundancy – a whole lot of protective features for half-rack and smaller devices, like DC power conditioning, load-sharing, surge protection and reset-able fuses. The new 450w Dual Redundant, Hot Swap-able Power Supply fits into any ONErack Chassis 4RU, 5RU and 6RU, which can hold up to 16 modules with up to 2 voltage selectors each. When using a ONErack Power Supply, each voltage selector can provide power @ 5v, 7.5v, 9v, 12v, 13.5v, 18v, & 24v -each up to 35 watts.
When you want create more complex signal distribution you need to add Distribution Amplifiers or additional ports to your devices. tvONE 2, 4 and 8 port DA’s for UHD 4K, HDMI, DVI, HD-SDI and HD15 make it simple to provide multiple outputs of an input signal without loss of quality or signal level. We can offer guaranteed signal transmission up to 1200ft (366m) using our propriety MultiView technology over your structured cabling including Cat 5 and Cat 6 installations. If you need to see your signal up to 30km (30,000m) distance then our Voyager is the perfect optical fibre system. Voyager can deploy in a multitude of network topologies to meet any environment.