Sale!

Magewell Pro Convert HDMI TX

$694.00 $640.00

Magewell Pro Convert HDMI TX will convert one channel of HDMI signal with embedded audio to an NDI® stream and includes PTZ Control, Tally and PoE support

Magewell Pro Convert HDMI TX

Magewell Pro Convert HDMI TX will convert one channel of HDMI signal with embedded audio to an NDI® stream and includes PTZ Control, Tally and PoE support


Supported software includes OBS, XSplit, vMix, VidBlasterX, Wirecast, streamstar, mimoLive and any NewTek NDI-enabled encoding or streaming software.

NDI® Output Format Includes Support for 4:2:2 8-bit output, up to 2048 x 1080 60fps output resolution and NDI 3.x

Video Processing Features:

  • Support for capture resolutions up to 2048 x 1080
  • Video brightness, contrast, saturation, hue adjustment
  • Video de-interlacing
    • Top field only
    • Bottom field only
  • Video aspect ratio conversion
    • Auto or manual selection of output aspect ratio
  • Video colour format conversion
    • Auto or manual selection of input colour format & quantization range
    • Auto or manual selection of output colour format, quantization range & saturation range
    • Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input colour formats
    • Support for YUV BT.601, YUV BT.709, YUV BT.2020 output colour formats
    • Support for Limited or Full quantization range
    • Support for Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Video mirror flip

HDMI Specific Features

  • 165MHz HDMI receiver
  • Adaptive HDMI equaliser support for cables lengths up to 30M
  • Support for customised EDID
  • Support for extraction of AVI/Audio InfoFrames
  • Full colorimetry support
  • Support up to 2048×1200 4:4:4/4:2:2 60fps input signals
  • Support 8 input and 2 output IEC60958 audio streams
  • Support for extraction of audio formation information & channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

Pro Convert HDMI TX Diagram

SPECIFICATIONS AND FEATURES

Interface

Input interface:

  • HDMI (DVI-D 1.0 / HDMI 1.4)
  • Support up to 2048 x 1080 60fps

USB Interface

  • USB 2.0 for power and data transfer

Network Interface

  • 10/100/1000 Mbps Ethernet
  • Support IEEE 802.3af PoE

Power Interface

  • DC+5V

PTZ Interface

  • Mini-DIN-8

NDI Encoding

  • Support for 4:2:2 8-bit output
  • Support for up to 2048×1200 60fps
  • Support for NDI 3.x

Firmware

  • Upgradable firmware

Accessories

  • USB 2.0 A to B Cable
  • 5V/2.1A power adaptor
  • Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
  • Tally lights
  • L-bracket
  • LED matrix panel (optional)

Full Specifications Document

Magewell Pro Convert Range