NewTek Studio I/O IP Module

$26,021.00 $24,200.00

The NewTek Studio NC1 I/O IP Module delivers 4-channel SMPTE ST 2110 connectivity to and from TriCaster TC1 and NewTek IP Series

Available on backorder

SKU: NC1I/OIP Categories: , , , , Tags: ,

Studio NC1 I/O IP Module

The NewTek Studio NC1 I/O IP Module delivers 4-channel SMPTE ST 2110 connectivity to and from TriCaster TC1 and NewTek IP Series

Complete your current workflow or create an entirely new one. From increasing your available inputs and outputs, to merging established and emerging technologies, to linking locations across your network, the NewTek Studio NC1 I/O IP Module is a universal solution that adapts to your production needs.

This is Newtek’s first rack-mount appliance that provides full support for the SMPTE ST 2110 standard — allowing uncompressed video of either four 1080p channels or a single 4K channel over IP infrastructure. The Studio Module will remain fully compliant with the SMPTE ST 2110 standard, allowing for complete inter-operability with any other broadcast appliance working within the same IP standard. The Studio Module can also be used as either input or output — placing 1080p/4K signals onto the network, or decoding them back into standardised SDI signals. The NC1 Studio I/O IP Module also supports NewTek NDI on every channel. *Pre-Release Details. All specifications on this page subject to change.

Technical Specifications

  • IP I/O4 x 3G/HD/SD IP conversion channels
    • 4 x IP inputs supporting NDI® or SMPTE ST 2110
    • 4 x IP outputs supporting NDI® or SMPTE ST 2110


  • Channels independently configurable for translation to NDI® or SMPTE ST 2110

Audio Networking

  • Native support for network audio input and output via NDI®
  • Embedded audio supported for all NDI® input and output video signals
  • Integrated support* for Dante™ networking protocol from Audinate®
  • Support for AES67 protocol via compatible WDM audio drivers**

*Requires Dante Virtual Soundcard license from Audinate (sold separately)
**Requires third-party virtual sound card license (sold separately)

Audio Channels

  • Up to 16 channels of AES67 PCM audio per video flow for SMPTE ST 2110-30 encapsulation

Standard Formats Supported

  • 1080p: 60, 59.94, 50
  • 1080p/PsF: 30, 29.97, 25, 24, 23.98
  • 1080i: 30, 29.97, 25
  • 720p: 60, 59.94, 50
  • 576i: 25
  • 480i: 29.97


  • Support for up to 4 simultaneous channels of integrated media playback, configurable per channel, and available for IP output

Media File Formats Supported

  • Video: AVI, DV, DVCPro, DVCProHD, FLV, F4V, H.263, H.264, MOV, MKV, MJPEG, MPEG, MP4, WMV, WebM, and more
  • Image: PSD, PNG, TGA, BMP, JPEG, JPEG-XR, JPEG2000, EXR, RAW, TIF, WebP, and more
  • Audio: AIFF, MP3, WAV, and more

Multiviewer Output

  • 1 x multiviewer output via HDMI, supporting standard display resolutions up to 1920×1200, with configurable workspaces and viewports

Alpha Matte Support

  • Assign a second input of identical type as the alpha matte source for NDI® output

Signal Monitoring

Integrated waveform and vector-scope, full field rate with digital calibration, colour preview and support for ITU-R Rec. 709


  • Video: 8-bit and 10-bit YUV 4:2:2
  • Audio: 48 kHz


  • Genlock over IP as per SMPTE ST2059-2

A/V Standards via SFP+

  • Serial digital component 4:2:2 video in accordance with SMPTE ST 259M, ST 292M, and ST 425-AB
  • Support for 16-bit, 20-bit, and 24-bit audio streams


  • 2 x 10 Gigabit NIC (IEEE 802.3ae; optical)
    • MSA-compatible SFP+ transceivers supported
  • 2 x 1 Gigabit NIC

Discovery and Registration

  • NDI® native

Control and Management

  • Multicast/Unicast
  • IGMPv2 support
  • Static IPV4 addresses
  • DHCP
  • Generic packet interface for in-band control

System Physical

1RU chassis with 280W redundant PSU
19.0 x 1.75 x 16.75 in (48.3 x 4.5 x 42.5 cm) with rack ears attached

Check out NDI Software Tools!

See Also: NewTek Studio I/O Module