Postium OBM-P240: 24″ Picture-by-Picture Monitor with 3G-SDI
The OBM-P240 incorporates a dual scaler, which enables the display two different SDI signals on the screen. OBM P series can display Waveform and Vector Scope on each simultaneously, which is very useful for dual monitoring. Postium’s OBM P series offers superior picture quality, wide viewing angle, and an array of professional features including advanced audio & video signal analysis functions. The OBM P series is equipped with flexible I/O interfaces such as 3G-SDI, HDMI, Component, Composite.
High Dynamic Range(HDR) Display Function
The OBM series provides the function to display the High Dynamic Range footage. Postium HDR function allows users to view both highlights and shadow detail of scenes at the same time, thus resulting in more natural and realistic images. The OBM series supports PQ EOTF (SMPTE ST 2084), Hybrid Log Gamma and S-Log3.
OBM-HDR provides the function of comparing HDR and SDR(Standard Dynamic Range) on the displayed image on the OBM series simultaneously.
This function controls the aperture level of a video signal, and displays images on screen with sharpened edges to help camera focus operation.
This function minimise the interlaced video processing time delay. This mode is also useful when displaying fast-motion interlaced video content and when reducing the delay between video and audio. (* OBM-U170 model is only supported.)
This function evaluates the Luma(Y’) level of the input image. If the certain Y’ level is set, the pixels with the designated Luma(Y’) level are displayed with the zebra pattern or the colour pattern. There are three modes in OBM False Colour.
Gamma value is adjustable from 1.0 to 3.0 as user’s preference to monitor in the dark area of the picture. Any pictures taken in either light or dark environment can be easily watched or analysed.
Camera Log Selection
The OBM series has the integrated camera LUT of the various camera manufacturers. It allows users to load the following camera logs. Log-C / C-Log / S-Log2, S-Log3 / J-Log1 The more camera LUTs will be updated.
Camera Log Mapped SDI Loop-out
This function allows to load the camera log to the original image and then send the camera log mapped image to another monitor through SDI loop out.
Remote Control via Ethernet
The OBM series can be connected via Ethernet connection and controlled remotely on the network.
Waveform, Vector Scope Size Adjustable
The image size of Waveform and Vector Scope can be changed between Small and Large.
System Date Copy
This function allows users to save the monitor configuration and adjustment settings on the USB memory stick and load them to other monitors. This is useful for multiple monitor systems, allowing the transfer of one monitor’s setup and adjustment data to another.
The OBM series can display various markers, including aspect marker, area marker, and centre marker. In addition, the detailed display settings of each marker are allowed. For example, the colour, brightness, horizontal/vertical position, and thickness of aspect markers can all be adjusted.
The unique Picture-by-Picture function of the OBM P series allows two different SDI input signals to be displayed on the screen simultaneously. This function is very convenient for making instant adjustments to two input sources, because there is no need to individually adjust the different characteristics of two monitors. The OBM P series offers the various Picture-by-Picture modes as follows.
1:1 Scan in PBP Mode
This function allows to magnify the either image of the two inputs in PBP mode.
When HDR more is set on, HDR Waveform is displayed on screen.
Dual Waveform Monitor & Vector Scope
The OBM P series can display Waveform, Vector Scope on the two different SDI videos respectively, which is very useful and convenient for dual monitoring.
The area of the two pictures to be displayed is selected using a vertical WIPE pattern. This function is useful when picture detail of the two images must be examined on a pixel basis.
In-Monitor Display(IMD) Function
The image source names and tally information can be displayed on the screen, with an external remote function via Ethernet. The TSL system protocol is supported. The colour of the source name and tally colour can be select-able among White, Red, Green, Blue, Yellow, Cyan, Magenta.
Colour Settings Adjustable to Either of Two Images in PBP Mode
The OBM PBP function allows to adjust the colour settings to either of the two images and compare the two images. HDR / SDR Brightness, Contrast, Colour Temperature, Camera LUT, and other colour settings can be changed. This unique function allows to display the same image side by side, change the colour settings to one image, and then compare the original image and the changed image on the screen.
Password Lock for User Preset
When multiple users share the same monitor, each user can register his/her own password for colour temperature and user preset data. This ensures the users correctly recall their preset data, and keep preset information safe from unauthorised use.
Custom 3D LUT File Import
The OBM series allow the user to import 3D Look-up Table for accurate and consistent colour matching between individual displays as well as using customised ‘looks’ that have been created by 3rd party colour-grading applications. 32ˆ³ and 64ˆ³ cube file are supported.
|2 X BNC||3G-SDI-1/2|
|1 X HDMI||HDMI 1.3a|
|3 x BNC (YPbPr)||Analog(YPbPr)|
|1 x BNC (CVBS)||Composite|
|2 x BNC||3G / HD / SD-SDI-1/2|
|INPUT SIGNAL FORMAT|
|SMPTE ST 425-AB||1080p(60/59.94/50/30/29.97/25/24/23.98/30sF29.97sF/25sF/24sF/23.98sF) / 1080i (60/59.94/50)|
|SMPTE 274/292||1080i (60/59.94/50) / 1080p(30/29.97/25/24/24sF/23.98/23.98sF)|
|SMPTE ST 2048||2048 x 1080p(24/24sF/23.98/23.98sF)|
|SMPTE ST 125||480i(59.94)|
|AUDIO IN / OUT|
|1 x Phone Jack In||Line In(Stereo)|
|1 x Phone Jack OUT||H/P Out(Front, Stereo)|
|2 x Speaker Out||Stereo|
|Resolution||1920 x 1080 (16:9)||1920 x 1080 (16:9)||1920 x 1200 (16:10)||1920 x 1080 (16:9)||1920 x 1080 (16:9)||1920 x 1080 (16:9)||1920 x 1080 (16:9)|
|Viewing Angle||178(H), 178(V)||178(H), 178(V)||178(H), 178(V)||178(H), 178(V)||178(H), 178(V)||178(H), 178(V)||178(H), 178(V)|
|Display Area||408.96 x|
|1 x Ethernet||Control/Update, RJ-45P Input / Output|
|1 x GPIO||GPI-7 Port, RJ-45P Jack|
|2 x Serial||RS-422 Jack, RJ-45P Input / Output|
|1 x USB||For Firmware Update, Color Calibration|
/ DC 12V
/ DC 24V
|MAX 40W||MAX 100W||156W||220W||283W|
|0°C ~ 40°C (32°F ~ 104°F)|
|20% ~ 80% RH|
|Weight||6.7kg / 14.77lbs||8.5kg / 18.73lbs||10.5kg / 23.14lbs||22kg / 48.50lbs||32kg / 70.54lbs||35kg / 77.16lbs||37kg / 81.57lbs|
|470 x 335 x 120|
mm18.50 x 13.18 x 4.72
|538 x 363 x 120|
mm21.18 x 14.26 x 4.72
|600 x 430 x 130|
mm23.62 x 16.92 x 5.11
|749 x 507 x 176|
mm29.48 x 19.96 x 6.92
|988 x 640 x 300|
mm38.89 x 21.19 x 11.81
|1074 x 687 x 300|
mm42.28 x 27.04 x 11.81
|1258 x 815 x 270|
mm49.52 x 32.08 x 10.62
|Option||Carrying Case / Sun Hood / Acrylic Protector / V-Mount / Rack Mount Kit||Wall Mount Kit / Carrying Case|